Once you have the side off, you will see a big plastic container where the water comes in. It is called a Torx and the size you will need is TT15. Very much like an Allan key on a screwdriver. In order to do do this, you will need a special tool which you can buy from most hardware stores. This PCB is found on the left hand side of the machine under the casing. This tells the machine that water is flowing into the dishwasher. How it works is once water comes through into the machine and spins a wheel, this then has some affect on the reed switch (I think it opens it). After searching around quite a bit and asking for professional paid advice via ( - paid for service for reasonable price - £11 in my case) I found that it was a problem with a small circuit board (also known as a PCB - printed circuit board) which has a micro reed switch (part of the flowmeter). Apparantly this indicates a filling fault. This indicates a fault number (flash 4 times, pause, flash 4 times = F4). I've read a bit about problems like this and manaaged to fix my ADP8322.įirst check how many times the light is flashing.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |